ARL-400 is a cement based, polymer modified, chlorine free, one component, fast curing repair and adhesive mortar.
Technical Specifications
Material Content: Cement, aggregate and special additive
Color: Gray
Density: ≈ 2,25 kg / lt
Dmax: 2,5 mm
Usage Areas
- In renovation of all kinds of concrete repairs
- In the preparation of the surface on which marble to be laid and adhering the marble.
- In surface’s float finishing operation for the wet areas such as toilets, bathrooms and kitchens.
- For filling cavities and cavities
- It can be applied in indoor and outdoor environmental conditions.
Advantages
- It provides very good adhesion.
- Compressive strength is high.
- There is not any chemical inside which contains chloride.
- It does not decompose and vomit.
- It is applied by mixing with water.
- It is easy to prepare and apply.
- It gets fast resistance.
Method of Application
- The application surface should be cleaned, residues that will prevent adhesion should be removed, and concrete surfaces should be moisturized with water. After moisturizing, no water should remain on the concrete surface, but the surface should be saturated with water.
- Since setting time is short, just enough material should be prepared to be applied.
- It should be mixed with a sufficient amount of water. Large amount of water reduces the resistance.
- After ARL-400 (which is prepared by mixing with water) starts to harden, there should not be water added again.
- It is recommended to complete the application within 15-20 minutes after mixing the product with water.
- After the application, cleaning is done with water.
Packaging and Storage
- 25 kg craft bag
- Under appropriate storage conditions – in dry and humid environments-, shelf life is 1 years from the date of production.
