IZO-BET 2K

IZO-BET 2K is a waterproofing material which is consisting of acrylic copolymer emulsion and cement-based powder, two component, fully elastic and with polypropylene fiber reinforcement.

Technical Specifications

Material Content: Acrylic Copolymer and cement based powder

Color: Gray

Density(liquid): ≈ 1,05 kg / lt

Solid Content(liquid): ≈ %45

Solubility in Water: Easily Dissolved

 Usage Areas

  • In structures, especially in wet areas; under the ceramic applications for terraces, balconies and pools.
  • On cement based screed and plaster,
  • On old ceramic floor (It is recommended to apply AREL AKRİLİK ASTAR (AREL ACRYLIC PRIMER) as a primer)
  • On wet floors

Advantages

  • Suitable for wet duty areas (wc, bathroom, kitchen etc.), terraces, swimming pools
  • On the applied area, direct ceramic, tile, etc. can be applied with adhesives.
  • With its fully elastic structure, it has compatibility for the differences of temperature and flexibility.
  • Easy and comfortable application by the ready-to-use mix ratio
  • Crack bridging feature

Method of Application

  • The surface must be free from dust, clean and intact. The surface should be moisturized before application. It is recommended to prime the surface with AREL AKRİLİK ASTAR (AREL ACRYLIC PRIMER) before application of İZO-BET 2K.
  • The primed surface increases the adhesion strength and efficiency of the İZO-BET 2K to concrete and prevents cracking.
  • It should be applied between + 5 oC and + 30 oC. It should not be applied on days when there is a risk of rain and frost.
  • While adding slowly 20 kg powder component to 10 kg liquid component, it should be mixed with low speed mixer for about 3-5 minutes. It should be applied by brush or trowel etc. with a minimum of 2 coats and each coat must be perpendicular to the other one.

 Packaging and Storage

  • 10 kg plastic drum & 20 kg kraft bag
  • Under appropriate storage conditions – in dry and humid environments-, shelf life is 1 years from the date of production.
  • The liquid component must be protected from frost. The frozen product becomes unusable.